Knoke Tambour Door Systems

25 years of European Engineered Quality

Kitchen roller shutter modules & systems for cabinet interiors

REFER TO THE INFORMATION BELOW TO DETERMINE PRODUCT SUITABILITY

WE CANNOT QUOTE BASED ON DRAWINGS. THE QUOTE REQUEST FORM PROVIDED BELOW IS REQUIRED FOR A QUOTE.
View Resources section (below) for BROCHURES, INSTALLATION INSTRUCTIONS and QUOTE/ORDER FORMS

Made-to-order kits are designed and manufactured in Europe. They are delivered pre-assembled as a convenient and easy-to-install cartridge system.

Door, top/side profiles and mechanism only.
DOES NOT include any cabinetry/panels or support shelves
This is a custom product. To request a quote, Scroll to READ AND VIEW INFORMATION PROVIDED ON THIS PAGE, fill out the form under the 'Request a Quote' Section of this page and send to [email protected]. Lead times indicated on quote.

FOR EXISTING/PLANNED CABINETRY with 90 degree angles

SLIDE-IN UNIT AND COVERS MADE TO ORDER

Each section of this page builds on the last. Best viewed on a computer.

Read as you scroll for complete product information.

Make your selections:

1. Case

2. Profile style

3. Slat finish & style

Keep scrolling for details...

SmartPlus 40 Matte Black

SmartPlus 25 Anodised Aluminum

1. Case

Choose Smart Case or Dyna Case, depending on your existing/planned cabinet specifications and door size requirement.

SmartCase:

Min. Height 250mm (9-15/16"), Max. Height 1600mm (63")*
Min. Width 400mm *(15-3/4"), Max. Width 1200mm (47-1/4") [900mm (35-7/16") for Quasar Glass]*
Min. Depth 300mm (11-13/16")*
Suitable for vertical function with horizontal slats or horizontal function with vertical slat. Opens up/down or side-to-side

COMPONENTS INCLUDED. Image, below:

Plug-in unit

A: Door Module with roller shutter and weight compensator fitting

B: Cover profile

C: System-guiding profiles

NOTE: A shelf (not included) is required to be installed inside the the cabinet to support the module.

The Door module (A) takes up min. 100mm (3-15/16") height.*

DynaCase:

Min. Height 250mm (9-15/16"), Max. Height 2200mm (86-5/8")*
Min. Width 400mm (15-3/4"), Max. Width up to 2400mm (94-1/2")*
Min. Depth 329mm (12-15/16")*
Suitable for vertical function with horizontal slats. Opens up/down

COMPONENTS INCLUDED. Image, below:

Plug-in unit

A: Door Module with roller shutter and spring shaft fitting
B: Cover profile

C: System-guiding profiles

NOTE: A shelf (not included) is required to be installed inside the cabinet to support the module for Heights 250mm (9-13/16") - 1500mm (59-1/16"). A Support bracket is included for Heights 1501mm (59-1/8) - 2200mm (86-5/8").

The Door module (A) takes up 155mm (6-1/8") height.*

Smart Case Components

Dyna Case Components

Mounting Videos

SmartCase Mounting Video

Note: Videos are visual guides, actual measurements are shown in detail in the Installation instructions in the Resources section of this page, below

DynaCase Mounting Video

Note: These DynaCase instructions show the use of the included support brackets, which come with heights 1501mm +. Heights 1500 and below require support shelf for installation (not included)

* Measurements vary based on slat selected and refer to EXTERIOR dimensions (inclusive of existing/planned cabinet panel thickness)

This product can be installed in cabinets with sidewall (panel) thicknesses of 16mm (5/8") or 19mm (3/4")
Although the min. Height dimension is 250mm (9-15/16") for both SmartCase and DynaCase, the Door Module (A) takes up min. 100mm (3-15/16") height for SmartCase and 155mm (6-1/8") height for DynaCase. Keep this in mind for small spaces.

*SEE BROCHURES IN RESOURCES SECTION FOR DETAILS.

2. Profile style

Choose profile style for Smart Case or Dyna Case. Profiles will fit existing/planned cabinet panels 16mm (5/8") or 19mm (3/4")

See brochures and installation instructions in RESOURCES section for more detail

SmartCase Profile Choices:

Different Profile Style options for different looks

System Contour and System Slim Line are truly slide-in with no extra preparation required for the side panels.

System Frame and System Classic require some extra side panel preparation.

See the Installation Instructions, Brochure SmartCase and Brochure DynaCase, downloadable in the RESOURCES section (below) for more details.

DynaCase Profile Choices:

System Contour

System Yankee

3. Slats (Roller Shutters)

Choose from the slats below

See brochures and installation instructions in RESOURCES section for more detail

Quasar Reflex Glass 40 (shown in Float Glass Black Lacquered)

SmartPlus 40 (shown in Anodised Aluminum)

Smart Plus 25 (shown in stainless steel effect)

KS40F (shown in Matte Black)

KS25F (shown in stainless steel effect)

Slats Style/Finish. Click links below for more information.

SmartPlus 25: 25mm Aluminum with stainless steel effect, anodised aluminum or matte black aluminum finish. $$$
Smart Plus 40: 40mm Aluminum with stainless steel effect, anodised aluminum or matte black finish. $$$
KS25F: 25mm ABS with stainless steel effect, anodised aluminum or matte black finish. $$
KS40F: 40mm ABS with stainless steel effect or matte black finish. $$
Quasar Reflex Glass - for use in SmartCase ONLY- 40mm Safety Glass in float glass satined (frosted), white glass satined (frosted), black glass clear (smoked), float glass black lacquered or white glass white lacquered. Max Width 900mm. $$$$